Tag Archives: walnut

Polaris – Throwback to the Future

Polaris Logo

Artisan Millshop recently completed an installation of custom designed furniture and decorative pieces in the Polaris Restaurant in Atlanta.  The Johnson Studio, based out of Atlanta, Georgia, is an architecture and design studio that specializes in creating restaurants that not only cater to the chefs and staff but also the guests who ultimately are the reason to open a restaurant in the first place.  Artisan Millshop initially worked with The Johnson Studio on the Restaurant R’evolution project in New Orleans beginning in 2010 and since then, our relationship has flourished.  We share a mutual appreciation for practicality of design, desire to see long-term satisfaction for our clients and finding the beauty and precision in the details.  When we first heard about the renovation of the Hyatt Regency Atlanta on Peachtree Street we were excited and intrigued.  We were excited to be a part of a renovation of an Atlanta institution and landmark that had been closed for over 10 years and intrigued because we knew the logistical challenges we would face with regard to just getting the various elements into the space.  Who doesn’t like to overcome a challenge?  After months of design discussion, shop drawings and creating in the shop, we were finally ready to deliver to Polaris, the highly anticipated reopening restaurant/lounge.

Penske Truck

 To begin, we loaded up a Penske truck, with the help of Cooper, Julian, Claire and some other heavy lifters.  We set out on the road to Atlanta, mentally prepared for about a 7 hour drive.  Shortly after we began our drive, we realized there is a governor on the truck that keeps us at a cool 70 mph and under.  That wasn’t a big deal, but the chemical spill that caused a 2 hour reroute WAS a big deal.  Still, we’re on a mission, so we bought another bag of beef jerky and continued our journey.  We arrived in Atlanta around 11:30pm and enjoyed a late dinner with our friends, Randy and Puzio, at Six Feet Under Pub and Fishhouse that overlooks downtown Atlanta.  The next morning, on our drive to the Hyatt, we ran smack into…. Guess what?  A parade!  After some tricky maneuvering around blocked off streets, with which we are very familiar coming from New Orleans, home of Mardi Gras, we made it to the hotel.









Hyatt Atlanta Lobby









Hyatt Glass Elevator

Every piece had to go from the loading dock to the freight elevator which went ½ a floor- no kidding.  Then, from that level, down two corridors to a passenger elevator and up to Polaris.

Two of my personal favorite pieces, the communal tables, had to be assembled in place.  The walnut bases were separate from the table tops, which were separate from the bronze inlays.

Walnut FlitchesWalnut Communal Table in Process        IMG_0506










Bronze Inlay







It was tricky and taxing to get the elements up to Polaris, but once we were up, with tools, some good music and the best view in the city, we were ready to build!  For those familiar with Polaris, you know that one of the cool features about it is that it rotates 360° (the image below is the reflection of Polaris in a neighboring high rise).  Fortunately, we weren’t rotating during our installation, for the most part.  In the rare cases that we were rotating, we had to be aware of where we placed tools because if not set in the right spot, it could be clear on the other side of the lounge when we next reached for said tool.  It didn’t happen often, but when it did, it was good for a chuckle!

Polaris Reflection

Another piece that was assembled on site is the screen with cerused oak mounted on iron.

Cerused Oak Decorative Screen



Puzio’s Iron Studio provided the screen and Artisan Millshop subsequently applied the cerused quarter sawn white oak panels. Cerusing is a multi-step method of creating a finish that is textured and in this case, contrasting.  First, a wire brush is used to open the pores and grains of the wood.  Next, the oak is stained using dye. Then, shellac is brushed on, followed by edge filler for the cerusing effect.  Finally, polyurethane is applied as a top coat and sealant. This screen certainly helped in staying with the retro feel of the design.

Quarter Sawn Cerused White OakCerused Quarter Sawn White Oak








Another piece that we made was a cocktail table with zebrawood veneer table top on a three-legged cantilevered table base.  It’s currently at the entrance to the lounge, so you see it as soon as the elevator doors open.

Zebrawood Cocktail Table

Polaris_NightInterior6In addition, we manufactured four credenzas with leather-wrapped doors, veneered mahogany drawers and sides and black granite top.  These stunning pieces have a balance of smooth, hard, shiny and sharp textures.



We provided several black walnut tables of various sizes.  Each table was hand-scraped using a card scraper, with hand-beveled edges and hand-rubbed finish.  Here are two of the types of tables we delivered to the space.


The team at the Hyatt was a pleasure to work with as well as the design team with The Johnson Studio.   We loved being a part of project that required and featured intense attention to detail.  We just wish Polaris was closer so we can cozy up to one of the several beautiful features that work together to make up such a picturesque lounge!Polaris_NightInterior5

Tell us what you think:

Have you used any of the above mentioned techniques in a project (big or small) that you’ve worked on?

Would you consider incorporating some of the methods we used to create the finished looks we fabricated?

What are you working on now?